Drinking water at home: testing, filters and wells
For people who want to know what is in the water at their own tap, and what, if anything, to do about it.
For: Homeowners and renters on city water or a private well

Drinking water at home: 5 articles
Each article carries an issue date from the editorial calendar.
- Issue:
Is Jackson tap water safe to drink? What the latest test data shows
Is tap water in Jackson, Mississippi safe to drink now, and what should a household or building owner do about lead, disinfection byproducts and discolored water?
- Issue:
Reverse osmosis vs carbon filters: what each removes and what it costs
Should you choose reverse osmosis or an activated carbon filter for drinking water, based on what is actually in your water?
- Issue:
Do water filters remove PFAS? Certified options and when you need one
Which home water filters actually reduce PFAS, and does a Mississippi household or business need one?
- Issue:
How to tell if you have lead pipes and what to do about them
How can you tell whether your home or building has a lead service line or lead plumbing, and what should you do if it does?
- Issue:
Home water test kits vs a certified lab: which results can you trust?
Are home water test kits accurate enough, and when do you need a test from a state-certified laboratory instead?
Drinking water at home splits into two cases. On city water, the utility tests its water and publishes the results every year, but the service line and the pipes, faucets and fixtures inside a house are the owner’s, and the EPA names those as the most common sources of lead. On a private well, there is no utility at all: the EPA notes that private wells are not regulated under the Safe Drinking Water Act, and MSDH tests wells for bacteria only. In both cases the same EPA advice holds: testing is the only sure way to know. This section is about that testing and what follows from it.
What this section covers
- Testing. What to test for on city water and on a well, how first-draw samples work, how often to test, and how to find a laboratory certified for drinking water.
- Reading a lab report. Units (ppb, mg/L, grains per gallon), maximum contaminant levels, action levels and secondary standards, and dated changes such as the lead action level for water systems falling to 10 ppb on November 1, 2027.
- Filters and treatment. Why certification is claim-specific, what each NSF/ANSI standard covers, what each treatment stage does not remove, and why a filter used past its rating can stop doing its job.
- Private wells. The wellhead, testing after floods and repairs, disinfection guidance from MSDH, and when to call a licensed water well contractor.
- Notices. What a boil-water notice means for the filters and softeners in a house, and what to replace afterward.
Who it is for
Homeowners and renters, landlords of single homes, and anyone holding a lab report they are not sure how to read. Articles are general information, not medical advice. For a result above a limit, ask your utility (city water) or the health department (a well).
Related services and tools
The water test reader compares results with EPA limits, the treatment selector matches one problem to what can address it, and the private well checklist covers testing and the wellhead. The filter life calculator and softener sizing calculator work from your own numbers. For a house, see homes on city water or a well, drinking water systems and whole-building filtration.
Start with a water review.
Tell us about the building: what it is, who uses it, where the water comes from and what you would like to change. We reply with questions and a time to walk the building with you.