Maredes homeRequest a water review
Menu

Is Jackson tap water safe to drink? What the latest test data shows

The reader questionIs tap water in Jackson, Mississippi safe to drink now, and what should a household or building owner do about lead, disinfection byproducts and discolored water?

A clear tumbler of water stands in the tank with the outside waterline level with the water inside it, so the water in the glass seems to vanish into the tank.

Whether Jackson, MS water is safe to drink is answered by three public bodies, each with a date, and none of their answers covers the pipes inside your building. JXN Water, which runs the system under a federal court order, tells customers on its FAQ page that “your water is safe, straight from the tap,” and its quarterly report dated October 29, 2026 says the water “meets all Safe Drinking Water Act standards to all customers all the time, except for brief periods of unavoidable local interruptions.” The same utility’s 2025 Water Quality Report lists disinfection byproduct violations in the first half of 2025, the state’s database records a byproduct violation at the Maddox Road well system for July to September 2026, and the Mississippi State Department of Health (MSDH) still advises children five and under and pregnant women to use NSF 53 filtered water or bottled water. Lead mostly comes from service lines and building plumbing, so the useful answer for your household is a short check of your own tap.

Below: what each source says, what the 2025 report and the 2026 records show, how to read the terms, and the steps a household, landlord or small business can take. Every figure was checked at its source on November 22, 2026; follow the links for the current version.

Is Jackson water safe to drink? What JXN Water, MSDH and EPA say

JXN Water says yes, MSDH keeps lead precautions in place for young children and pregnancy, and EPA says repairs continue and “there is still work to be done.” Each statement has a different date and a different purpose, so read them together.

Source Date What it says, in its own words
JXN Water FAQ Checked November 22, 2026 (page last modified September 2025) Answers “Is my water safe?” with “Your water is safe, straight from the tap.” Also: “Additional filtering of water in Jackson is not necessary,” “Filtering tap water is a personal choice,” and “For vulnerable individuals, the decision to consume tap water or anything else is a personal choice. You can discuss these decisions with your healthcare provider.”
JXN Water quarterly report to the court October 29, 2026, for July to September 2026 The system “is operationally stable and providing water of appropriate pressure, that meets all Safe Drinking Water Act standards to all customers all the time, except for brief periods of unavoidable local interruptions during ongoing system repairs and improvements.”
JXN Water manganese notice July 13, 2026 Yellow to brown water was “an aesthetic issue, not a health or safety issue,” and the water “meets all applicable state and federal drinking water standards.”
MSDH Jackson Water System page Checked November 22, 2026 Keeps lead precautions “especially for households with young children or pregnant women,” including filtered water (“NSF53 certified filter”) or bottled water for children five and under and pregnant women. Its answer to “Is the Jackson water supply safe?” begins: “There is no indication of elevated lead levels in Jackson source water.”
EPA Jackson page Last updated November 20, 2026 “Extensive repairs continue at both of Jackson’s water treatment plants and in the water distribution network to maintain reliable delivery of safe drinking water. Additional work is needed to establish long-term stability of the water system.” Also: “While EPA and DOJ recognize improvements have been made, there is still work to be done.”

Sources: JXN Water FAQ, JXN Water quarterly report for the quarter ended September 30, 2026, JXN Water manganese notice, MSDH Jackson Water System page, EPA Jackson, MS drinking water.

Who these three bodies are

JXN Water is the company through which the Interim Third-Party Manager operates the system under the Interim Stipulated Order entered November 29, 2022 in United States v. City of Jackson (Case 3:22-cv-00686-HTW-LGI). The order requires quarterly status reports to the parties and the court, posted on a public website. For governance and the transition plan, see Jackson’s water system in 2026.

MSDH’s Bureau of Public Water Supply “is the enforcement authority responsible for ensuring that public water systems comply with the Safe Drinking Water Act,” in MSDH’s own words, and takes questions at (601) 576-7518. EPA sets the national rules and is a party to the court case.

What MSDH recommends for lead

MSDH’s Jackson page lists these steps, which it says remain in place “until the City of Jackson makes the necessary changes required to stabilize the pH levels in its water system that contribute to corrosion”:

  • Before using tap water for drinking or cooking, run the tap on cold for one to two minutes.
  • Never use hot tap water for drinking or cooking.
  • Clean faucet aerators periodically by removing any particles or sediment caught in the screen.
  • Any child five years of age or younger and any pregnant woman should use filtered water (NSF53 certified filter) or bottled water for drinking and cooking.
  • Baby formula should be “ready-to-feed” or prepared using only filtered water or bottled water.
  • Parents of children five or younger should contact their child’s pediatrician or primary care provider about lead screening and blood testing.

The page explains why the advice applies to everyone: “Levels of lead detected across the City of Jackson are site-specific, and depend on the plumbing materials in your home.” Its text cites tap samples from January to June 2021 and states that, because of a delay in corrosion control changes at J.H. Fewell, “the City remains out of compliance with the EPA Lead and Copper Rule.” EPA’s page, updated November 20, 2026, says corrosion control treatment “was completed at J.H. Fewell Water Treatment Plant.” For the current status of MSDH’s precautions, call the Bureau of Public Water Supply.

What JXN Water’s 2025 water quality report shows

The 2025 Water Quality Report is the annual Consumer Confidence Report for both City of Jackson systems. EPA requires suppliers to send this report each year by July 1, and it covers testing from January 1 to December 31, 2025, with some less frequent tests from earlier years.

Two systems, two sets of results

Jackson has two public water systems, and the report gives each its own table. Which one serves your address changes the numbers that apply to you.

  • Surface water system (PWS MS0250008). The J.H. Fewell plant treats water from the Pearl River and the O.B. Curtis plant treats water from the Ross Barnett Reservoir. MSDH’s Drinking Water Watch lists a population served of 189,673.
  • Maddox Road groundwater system (PWS MS0250012). Wells draw from the Sparta aquifer. MSDH’s database lists 28,098 people served.

If you are not sure which system serves your building, JXN Water’s customer service number, 601-500-5200, is the place to ask.

The results that answer the safety question

Measure (2025) Surface water system Maddox Road groundwater system Federal limit or level
Lead, 90th percentile at customer taps 4.5 ppb (January to June; range not detected to 192 ppb; 3 of 100 samples above 15 ppb). 4.1 ppb (July to December; range not detected to 28.4 ppb; 1 of 100 above) 2.1 ppb (June to September; range not detected to 5.7 ppb; 0 of 30 above) Action level 15 ppb; health goal zero
Copper, 90th percentile 0.0426 ppm (1 of 100 above 1.3 ppm), then 0.0271 ppm (0 of 100) 0.15 ppm (0 of 30) Action level 1.3 ppm
Total trihalomethanes (TTHM), highest locational running annual average 92.5 ppb, violation 77.3 ppb, no violation MCL 80 ppb
Five haloacetic acids (HAA5), highest locational running annual average 69 ppb, violation 63.1 ppb, violation MCL 60 ppb
Disinfectant residual, running annual average Chloramine 3.0 ppm (single readings 0.1 to 5.40) Chlorine 1.10 ppm 4 ppm maximum residual disinfectant level
Nitrate (as nitrogen) 0.304 ppm Not listed MCL 10 ppm
Arsenic 0.6 ppb Not listed MCL 10 ppb
Sodium 3.3 ppm 151 ppm (range 139 to 151) No MCL
Unregulated contaminants (UCMR 5, 30 chemicals) All non-detects All non-detects Not regulated

Source: JXN Water, 2025 Water Quality Report, data tables for PWS MS0250008 and MS0250012.

The report places the byproduct violations in specific quarters. On the surface system, TTHM running averages exceeded 80 ppb at five sites in the first quarter, five in the second and one in the third, and the violations table lists January to June 2025. HAA5 exceeded 60 ppb at two sites in the first quarter and four in the second. On the Maddox Road system, HAA5 exceeded at one site in the second quarter and one in the third.

What the report says about lead and about the violations

The report states that “Lead in drinking water is primarily from materials and parts used in service lines and in home plumbing,” and that the city “cannot control the variety of materials used in the plumbing in your home.” It adds: “Because lead levels may vary over time, lead exposure is possible even when your tap sampling results do not detect lead at one point in time.” It also says the system “has remained below the lead action level of 15 ppb since 2017.”

For the byproducts, the report prints EPA’s required health effects language. People who drink water with TTHM above the MCL “over many years may experience problems with their liver, kidneys, or central nervous system, and may have an increased risk of getting cancer.” For HAA5 the wording is “over many years may have an increased risk of getting cancer.” As corrective actions, JXN Water lists evaluating changes to its treatment facilities, more water quality monitoring, process optimization and, on the Maddox Road system, a flushing protocol to reduce water age.

The report closes with significant deficiencies MSDH cited in sanitary surveys in November 2019 and February 2020, all “currently scheduled to be addressed by December 2026 contingent upon current approval by the EPA.”

What the newest 2026 records show

Results for 2026 are not in an annual report yet, but MSDH’s public database already lists lead summaries and violations through the third quarter of 2026. The surface system’s 2026 lead summaries are 3.2 and 5.9 ppb, and the one 2026 violation recorded is a TTHM running average on the Maddox Road well system.

Lead summaries through 2026

MSDH’s Drinking Water Watch publishes “Lead and Copper Sample Summary Results” for each system. For 2025 its figures (0.0045 and 0.0041 mg/L) match the 90th percentiles in JXN Water’s report (4.5 and 4.1 ppb), so the 2026 lines can be read the same way:

  • Surface system, January to June 2026: 0.0032 mg/L (3.2 ppb), 100 samples.
  • Surface system, July to December 2026: 0.0059 mg/L (5.9 ppb), 100 samples, listed on November 22, 2026, although the period runs to December 31.
  • Maddox Road system, 2026: 0.0022 mg/L (2.2 ppb), 30 samples.
0 5 10 15 20 Lead, 90th percentile (ppb) Action level today: 15 ppb From November 1, 2027: 10 ppb 4.5 4.1 3.2 5.9 Jan to Jun 2025 Jul to Dec 2025 Jan to Jun 2026 Jul to Dec 2026 (open)
Source: MSDH Drinking Water Watch, lead and copper sample summary results for the City of Jackson surface water system (PWS MS0250008), 100 samples per period, checked November 22, 2026. The 2025 values match the 90th percentiles in JXN Water's 2025 Water Quality Report. The July to December 2026 period ends December 31, 2026; the outlined bar shows the summary listed on the check date.

Violations on record

MSDH’s violation list for the surface system shows the 2025 TTHM and HAA5 running average violations, each with an enforcement entry reading “ST COMPLIANCE ACHIEVED” dated September 30, 2025. On November 22, 2026 the list showed no violation with a compliance period after June 2025. The database itself warns that “some of these violations may have been resolved and/or returned to compliance,” so click any entry to read its status.

For the Maddox Road system, the database lists one 2026 violation. It is a TTHM running average violation for July 1 to September 30, 2026, with an analysis result of 0.084 mg/L (84 ppb) against the 80 ppb MCL. The record shows a formal notice of violation issued September 30, 2026 and a public notice recorded as received November 6, 2026.

What the October 2026 quarterly report adds

The quarterly report dated October 29, 2026 is the latest of the court-ordered status reports. Several of its entries bear on water quality at the tap:

  • Corrosion control at J.H. Fewell is listed as complete, dated December 2023. At O.B. Curtis the entry reads “Commissioning underway,” against an estimated completion of August 2026.
  • PFAS sampling of source and finished water “revealed no issues with PFAS, all samples were either non-detected or well below EPA’s PFAS MCL levels.”
  • Based on preliminary inventory data, Jackson has “approximately 13,000 galvanized service lines” that may require replacement under the Lead and Copper Rule Improvements, deferred “until funding is available.”
  • JXN Water issued 61 precautionary boil-water notices during the quarter, averaging 35.5 connections for 3.1 days each, and no city-wide notice.

You can look these records up yourself. EPA’s Jackson page points readers to MSDH for “state inspection reports, state violations and compliance plans, and water quality reports,” and JXN Water’s home page links the annual report, monthly dashboards and recent quarterly reports.

How to read a lead result, a running average and a violation

Three ideas explain most of the numbers above: lead is judged by an action level across many homes, byproducts by a running average at each site, and secondary standards are guidelines. For these contaminants, a single high reading is not by itself a violation, and a result under a limit is not a health finding.

Lead: an action level, not a pass mark for your home

EPA regulates lead with a treatment technique rather than a maximum contaminant level. Its drinking water regulations table sets the action level at 0.015 mg/L (15 ppb) and says: “If more than 10% of tap water samples exceed the action level, water systems must take additional steps.” Beginning November 1, 2027, under the Lead and Copper Rule Improvements, the action level becomes 0.010 mg/L (10 ppb). The health goal, the MCLG, is zero.

The 90th percentile is the value that 90 percent of samples fall at or below. When it is at or under the action level, no more than 10 percent of samples exceeded it, and the system did not trigger the extra steps. It says nothing about any one home, which is why a 192 ppb result can sit inside a sampling round with a 90th percentile of 4.5 ppb.

Example (fictional). A utility collects 100 first-draw samples from homes on its sampling list and ranks them from lowest to highest. Ninety-seven results fall below 5 ppb, and three come back at 20, 40 and 192 ppb. The 90th value in the ranking is still under 5 ppb, and only 3 percent of samples exceed 15 ppb, below the 10 percent trigger. The system meets the rule for that round. The three households whose taps gave 20, 40 and 192 ppb still have a lead problem at their own taps, and the rule’s numbers do not show it.

Byproducts: a running average at each sampling site

TTHM and HAA5 form when the disinfectant reacts with natural material in the water. EPA’s disinfection byproduct rules page explains that disinfection is needed to inactivate pathogens such as Giardia and Cryptosporidium, and that the rules limit the byproducts. The MCLs are 0.080 mg/L (80 ppb) for TTHM and 0.060 mg/L (60 ppb) for HAA5.

Compliance is judged on the locational running annual average, which the 2025 report defines as “the average of sample analytical results for samples taken at a particular monitoring location during the previous four calendar quarters.” So one high quarter at one site can push that site over the line for a year, and one high sample does not. The Maddox Road table shows the second case: single TTHM results reached 103 ppb, yet the report says no violation occurred because the running averages stayed below 80 ppb. EPA’s health language for these compounds refers to drinking water above the MCL “over many years.”

Disinfectant residual and secondary standards

Chloramine and chlorine have a maximum residual disinfectant level of 4.0 mg/L, and the report gives the running annual average against it. That is why single readings up to 5.40 ppm sit beside a reported average of 3.0 ppm and no violation.

EPA’s secondary standards are a different kind of number. They are “non-mandatory water quality standards for 15 contaminants,” which EPA does not enforce, set for “aesthetic considerations, such as taste, color, and odor.” Manganese, which JXN Water named as the cause of the July 2026 discoloration, is one of them.

Why the water at your tap can differ from the system’s numbers

The system’s results describe water at its plants and at its sampling sites. What reaches your glass also passes through a service line, your building’s pipes, solder, valves and faucet. The 2025 report says lead comes primarily from these materials.

JXN Water’s lead page says: “Drinking water leaving our treatment plants does not contain lead.” It continues that “in certain situations, water can cause lead to leach from water service lines, lead-based solder on copper pipes (used until 1988), and brass faucets/fittings that contain lead.” EPA’s lead basics page names “lead pipes, faucets, and fixtures” as the most common sources and says lead pipes are more likely in “older cities and homes built before 1986.”

What the service line inventory says

JXN Water’s September 2025 inventory, reported in the 2025 report, sorts every service line into one of four groups:

System Lead Galvanized requiring replacement Unknown lead status Non-lead Total
Surface water (MS0250008) None listed 93 32,527 30,449 63,069
Maddox Road (MS0250012) None listed 3 None listed 11,768 11,771

Source: JXN Water, 2025 Water Quality Report, service line inventory updated September 2025.

About 52 percent of the surface system’s lines (32,527 of 63,069) were of unknown lead status. “Unknown” is a records category, not a finding that a pipe is lead or is safe. JXN Water’s lead page explains that a galvanized line counts as “galvanized requiring replacement” when it is, or was, downstream of a lead line. Its map lets you type an address and see the status recorded for both the utility side and the private side.

Ownership is split at the meter. JXN Water owns the portion of the service line from the water main to the meter, and the property owner owns the portion from the meter to the building, plus all the plumbing inside. For how to check the pipe where it enters your building, what galvanized, copper and lead look like, and what replacement involves, see how to tell if you have lead pipes.

Standing water and hot water

EPA says “the more time water has been sitting in pipes, the more lead it may contain.” MSDH’s guidance for older homes applies “especially if the water has been off and sitting in the pipes for more than 6 hours.” JXN Water’s lead page recommends flushing the cold tap “from 30 seconds to 2 minutes, or until it becomes cold or reaches a steady temperature,” and says hot water “may cause increases in lead concentrations at the tap.” Its report adds that if you have a lead or galvanized-requiring-replacement line, “you may need to flush your pipes for a longer period.”

Clear water tells you nothing about lead. EPA puts it plainly: “you cannot see, taste, or smell lead dissolved in water.”

Brown or yellow water: what manganese means for drinking

JXN Water attributes Jackson’s seasonal yellow to brown water to manganese and calls it aesthetic. EPA’s manganese standard is a non-enforced guideline for color and taste, and color tells you nothing either way about lead or byproducts.

On July 13, 2026, JXN Water reported that customers in parts of the system had seen water “ranging in appearance from yellow to brown.” It confirmed “a seasonal rise in manganese, a naturally occurring mineral present in the Ross Barnett Reservoir and Pearl River source water,” and said warmer temperatures speed its release from soil and bedrock. The utility said it was flushing mains, adjusting treatment and monitoring manganese across the system. On November 22, 2026, its home page still carried a notice that “Seasonal changes have caused an increase in manganese.”

EPA’s secondary standard for manganese is 0.05 mg/L, and it lists the effects as “black to brown color; black staining; bitter metallic taste.” JXN Water’s manganese FAQ adds that it may stain “laundry, sinks, tubs, and toilets.”

What JXN Water asks customers to do

  • Run cold water for a few minutes if it looks discolored; “this often clears the line.”
  • Use cold water for drinking and cooking, and flush taps after water has sat for six or more hours.
  • Delay laundry until the water runs clear, to avoid staining light clothing.
  • Report ongoing discoloration to JXN Water at 601-500-5200 so crews can prioritize the area.

Manganese is not the only cause of color. JXN Water’s FAQ lists main breaks, broken pipes, routine line flushing and sudden temperature changes, and notes that plumbing in a home or office can affect the water too.

Boil-water notices are a separate question

A boil-water notice follows a pressure loss, a repair or a failed water quality test, not a lead or byproduct result. Boiling does not remove lead, so the two questions need separate answers.

JXN Water’s notice page says each of its notices “is a precautionary notice. It is the result of repair work.” Customers under a notice should bring water “to a rolling boil for one minute” for drinking, cooking, ice, medication, brushing teeth, baby formula, pets and washing dishes. On November 22, 2026, the page listed six active notices dated November 13 to 20, 2026, each affecting about 6 to 55 connections. The October 2026 quarterly report counted 61 such notices in the third quarter.

MSDH explains on its water safety notices page that systems issue their own precautionary notices “when water pressure is lost,” and that MSDH sends a state-issued notice “when water testing by the MSDH Public Health Laboratory indicates problems related to water quality.” MSDH also posts self-imposed notices “if properly notified.” On November 22, 2026, its list showed 16 active notices statewide, none naming the City of Jackson system. The two lists serve different purposes, so check both for your street.

Notices change daily, and nothing in this article tells you whether one applies to you today. For current notices, check JXN Water’s notice page and MSDH’s water safety notices. For what to do during and after a notice, use the boil-water notice checklist. For why notices are issued and what testing lifts them, see boil-water notices explained.

How to judge the water at your own tap, step by step

Eight checks cover what the system reports cannot: which system serves you, what your service line is, how old your plumbing is, who drinks the water and whether a notice applies. Work through them in order. Most take minutes and cost nothing.

  1. Find your system. Confirm whether your address is on the surface water system or the Maddox Road groundwater system, then read that system’s table in the 2025 Water Quality Report. The numbers differ, especially for sodium and byproducts.
  2. Read the latest records. Open MSDH’s Drinking Water Watch for your system and look at the lead summaries and the violation list. Note the compliance period and any “compliance achieved” entry for each violation.
  3. Look up your service line. Type your address into the map on JXN Water’s lead page. Write down what it shows for the utility side and the private side. If it says unknown or galvanized requiring replacement, or if you think it is wrong, call 601-500-5200.
  4. Check the building. Find the build year and the year of any repiping. EPA and MSDH both flag homes built before 1986, and JXN Water says lead solder was used on copper pipes until 1988. Old chrome or brass faucets and a galvanized pipe at the meter are worth noting.
  5. Think about who drinks the water. MSDH’s advice for children five and under, pregnancy and baby formula applies whatever your service line shows.
  6. Check notices. Look at both the JXN Water and MSDH lists for your street. A notice changes what you do today, regardless of lead.
  7. Adopt the low-cost habits. Run the cold tap after water has sat for six hours or more, never use hot tap water for drinking or cooking, and clean aerators. MSDH and JXN Water both list these steps.
  8. Decide on a test. Test if a child or pregnancy is involved, your line is unknown or galvanized, your plumbing predates 1988, or you are buying or renting a property. The next section covers how.
Your situationWhat the cited guidance saysA next step
A child five or under, or a pregnancy, in the homeMSDH: filtered water (NSF53 certified filter) or bottled water for drinking and cooking; formula ready-to-feed or made with filtered or bottled waterFollow MSDH's advice now and test the tap at a certified laboratory
Service line shown as unknown or galvanized requiring replacementJXN Water: with a lead or galvanized-requiring-replacement line you may need to flush longer; call to identify or correct the recordCheck where the line enters the building, then test
Plumbing installed before 1986, or copper with solder joints from before 1988EPA and MSDH: older homes are more likely to have lead in pipes, solder or fixturesFlush, use cold water, clean aerators, test
Yellow or brown waterJXN Water (July 13, 2026): seasonal manganese, aesthetic; run cold water, delay laundry, report itReport it; do not read color as a lead result
A boil-water notice on your streetJXN Water: rolling boil for one minute for drinking, cooking, ice, formula and dishesFollow the notice and the checklist until it is lifted
A restaurant, child care center or office break roomMSDH (2016): flush drinking points before first use each day; maintain ice machine and dispenser filtersWrite a daily flushing routine and keep a filter log
Sources: MSDH Jackson Water System page and Guidelines for Water Use in Food Facilities (February 26, 2016); JXN Water lead page, 2025 Water Quality Report, boil water notice page and July 13, 2026 manganese notice; EPA Basic Information about Lead in Drinking Water. Checked November 22, 2026.

If you are moving to the metro, ask the landlord or seller for the service line status from JXN Water’s map, the build year, any repiping records and any recent tap test. Those four items show where lead could enter your water before you sign.

Getting your tap tested at a certified laboratory

A test of your own tap is the only way to know your lead level. EPA says “testing is the only sure way of telling whether there are harmful quantities of lead in your drinking water,” and that testing “costs between $20 and $100.” Use a laboratory certified for drinking water and follow its sampling instructions exactly.

Where to get a test in the Jackson area

  • JXN Water. The 2025 report says customers concerned about lead who want their water tested can contact JXN Water at 601.500.5200.
  • The Mississippi Public Health Laboratory. JXN Water’s lead page says you can contact it at 601-576-7582 during business hours to have your water tested.
  • A private certified laboratory. MSDH publishes a list of in-state laboratories in its drinking water certification program, with the fields each is certified for (microbiology, chemistry). It notes that “the status of a laboratory may change.”
  • EPA’s hotline. The Safe Drinking Water Hotline, 800-426-4791, can point you to certified laboratories.

What to ask for

For lead, ask for a first-draw sample from the tap you drink from most, collected after the water has stood for the time the laboratory specifies. Ask the laboratory whether a second sample after flushing would help, and to report lead and copper with its reporting limit.

Byproduct testing tells a single home less. Compliance is a four-quarter running average at fixed sites, so one kitchen sample is a snapshot that cannot be compared directly with an MCL violation.

Example (fictional). A renter in a 1940s house on the surface water system finds her service line marked “unknown” on JXN Water’s map. She orders a lead test from a certified laboratory and collects a first-draw sample as instructed. The laboratory reports 9 ppb. That is below the 15 ppb action level but above the 10 ppb level that applies to utilities from November 1, 2027, and EPA’s health goal for lead is zero. She follows MSDH’s flushing and cold-water steps, shares the report with her landlord, and they call JXN Water to identify the line. Every number here is invented for illustration.

To compare a laboratory report with EPA’s limits, enter the values in the water test reader. It shows each result next to its action level, MCL or secondary standard and flags anything above. Treat it as a screening comparison, and ask the laboratory or MSDH about anything you do not understand.

What households, landlords and small businesses can do now

The official guidance converges on a short list: flush, use cold water, clean aerators, test, and if you filter, use a filter certified for the contaminant you are worried about. How you apply it depends on who is responsible for the building.

Households

If you decide to filter, check the certification, not the brand. EPA’s consumer tool for lead filters helps consumers find point-of-use and pitcher filters certified under both NSF/ANSI 53 and 42 to reduce lead “to 5 parts per billion (ppb) or less,” with Class I particulate reduction. JXN Water’s lead page adds three cautions: replace the cartridge on schedule, because an expired one is less effective; read the directions; and “do not run hot water through the filter.”

Certification is claim by claim. In NSF’s public listings for NSF/ANSI 53, “Lead Reduction” is a separate claim from “Trihalomethanes (TTHM) Reduction” and “VOC Reduction,” and NSF’s note on the VOC category says it “includes total trihalomethanes, which are a by-product of chlorination.” In the NSF/ANSI 53 listings we searched on November 22, 2026, we found no separate claim for haloacetic acids. Check the listing for the exact claim before you buy. The treatment selector maps each water problem to the treatment and certification that can address it.

Landlords and property managers

Look up each address on JXN Water’s map once, note both sides, and keep the result in the property file. For any “unknown” or “galvanized requiring replacement” line, call JXN Water to identify or correct it. Inside units, clean aerators at turnover and replace old chrome or brass faucets with ones carrying a lead-free mark; EPA’s guide to lead-free certification marks says NSF/ANSI/CAN 61 and 372 marks indicate compliance with its lead-free requirements. Whether you must test or tell tenants anything is a question for local rules and your own counsel.

Restaurants, child care centers and offices

MSDH’s Jackson page links guidelines for schools, child care and food facilities. The food facility guidelines, dated February 26, 2016, ask operators to flush drinking points “before first consumption each day” and to maintain ice machine and dispenser filters “in accordance with the manufacturer’s recommendations.” They say children five and under and pregnant patrons or employees should use NSF53 filtered water if available, or bottled water. The 2016 text mentioned a $20 lead sampling kit for Jackson customers; call 601-576-7582 for the current offer.

Our page on drinking water systems describes how each kitchen tap, coffee station or ice machine can be specified by its certification claim.

What to do next: a short checklist

You can answer most of the question for your own building in an afternoon. Keep the papers together; they are what anyone helping you will ask for first.

  • Your system’s table in the 2025 report and its 2026 lines in MSDH’s Drinking Water Watch.
  • Your service line status from JXN Water’s map, both sides, plus the build year and any repiping.
  • MSDH’s steps in place now if a child five or under or a pregnancy is in the home.
  • JXN Water’s and MSDH’s notice pages bookmarked.
  • A certified laboratory’s lead report, compared in the water test reader.
  • If you filter, a listing that names the exact claim you need, and a log of cartridge changes.

Maredes is a Jackson company that designs water treatment and reuse systems for one building at a time, and every project starts with a water review that includes sampling by a certified laboratory. Our Jackson, Mississippi page collects regional water facts, and the drinking water hub lists related articles. To plan tests across several taps or buildings, you can request a water review. This article is general information, not medical, legal or engineering advice; for current rules and notices, MSDH and JXN Water are the authorities.

Have a building in mind?

If this article describes a question about your home, property or business, tell us about the building. A project starts with a water review and a written summary of what we found.