Engagements and how quotes work
Start with a water review and decide from there. Each engagement is quoted in writing before work starts, and you can stop at the end of any of them.
For: Owners and managers deciding how much of a project to hand over

Maredes offers five engagements. They follow the six stages on how we work, and each one covers a different share of them. Most projects start with a water review, because the review decides whether anything else is worth doing. Some end there. Others continue to a design, an installation, a small pilot, or a service plan for a system already running.
The five engagements
Water review
The standalone first step. We read the bills, walk the building, take samples and send them to a laboratory certified for drinking water analysis. You receive a written review with the water balance, the laboratory’s results explained in plain language with its report attached, findings in order of cost (fixing leaks and fixtures usually comes first), a reuse screen, and the questions that remain. You can stop here and act on the findings yourself. See water review and lab testing.
Design package
For owners who want drawings and a specification, and who will hire the licensed contractor themselves. The package includes drawings, an equipment specification that names the certification each component must carry, the water balance, a code path memo for any reuse system, and a contractor bid package so that every bidder prices the same scope. Where the local authority requires an engineer’s seal, a licensed engineer seals the drawings. See system design.
Design and installation
The design package, plus coordination of licensed plumbing and mechanical contractors through installation, start-up and verification. Maredes reviews equipment submittals against the specification, answers contractor questions, checks the work at start-up, and compares the verification samples with the baseline. You receive an operating manual, and the first service visits are included. The contractors hold the licenses and pull the permits (MSBOC, City of Jackson).
Pilot system
One small reuse system for a fixed term, to measure before committing to more. Typical pilots are condensate from one air handler piped to cooling tower make-up, or simple laundry rinse recycling on one washer line. The measures are written down before it starts (gallons collected, gallons of city water replaced, water quality readings, maintenance time), and at the end of the term you decide to keep it, resize it or remove it. EPA’s figures give the planning range: three to 10 gallons of condensate a day per 1,000 square feet of air-conditioned space (EPA), and 10 to 35 percent savings from simple rinse recycling (EPA). A pilot replaces those ranges with your own numbers. A pilot is installed by licensed contractors with permits, like any other system.
Service plan
Scheduled filter, membrane and UV lamp changes, readings, sampling and plain-language reports, recorded in a maintenance log. Service plans apply to systems Maredes designed. For equipment designed or sold by others, a service plan is possible only after a water review, so that we know what the equipment is treating and what it should be doing. See monitoring and service.
Side by side
| Water review | Design package | Design and installation | Pilot system | Service plan | |
|---|---|---|---|---|---|
| Stages covered | 1 and 2 | 1 to 3 | 1 to 5, plus first service | A short version of 1 to 6 for one small system | 6 |
| Who hires the contractor | No contractor needed | You | You, with Maredes coordinating | You, with Maredes coordinating | Contractor only for repairs |
| Main documents | Written review, water balance, lab report explained | Drawings, specification, code path memo, bid package | All of the design package, plus start-up report and operating manual | Written measures and an end-of-term decision memo | Maintenance log and periodic reports |
| Good fit for | Every building, as the first step | Owners with a contractor they trust | Owners who want one party watching the details | Hotels and larger buildings testing reuse | Buildings with a Maredes-designed system |
| You can stop | After the review | After the package | After start-up | At the end of the term | At the end of the plan term |
What you provide and receive
In every engagement you provide one contact who knows the building and access to the meter, the equipment room and the roof. For a water review add twelve months or more of water and sewer bills, floor plans or a sketch, any past water tests and, for a private well, the well log. For design add the decisions the review leaves open and, for reuse, laundry pounds per day, air-conditioned floor area and roof area. For installation add your choice of licensed contractor, or a request for bids. The water review checklist covers the first step.
What you receive builds up stage by stage: the written review and water balance; certified laboratory results with the laboratory’s report attached; drawings, an equipment specification by certification and code notes; a code path memo for any reuse system; a contractor bid package; a start-up and verification report; and a monitoring and service plan with a maintenance log.
How quotes work
Maredes does not publish prices. Every engagement is quoted in writing before work starts, after a short conversation about the building. The quote states the scope, the documents you will receive, what is not included and the expected sequence of visits.
Three kinds of cost sit outside the Maredes fee, and the quote names each one:
- Laboratory fees, billed as quoted by the laboratory for the tests in the sampling plan.
- Equipment and installation, priced by licensed contractors from the bid package. Equipment is bought from manufacturers to the written specification.
- Permit and inspection fees, set by the local authority.
If the scope changes, for example a result calls for a second sample or the reuse screen opens a new option, the change is quoted in writing before the extra work begins. Nothing in a quote promises a savings figure, a payback period, a permit approval or a water quality outcome. To see how the numbers come together for one building, read the fictional example project; for common questions about cost and timing, see the FAQ.
Start with a water review.
Tell us about the building: what it is, who uses it, where the water comes from and what you would like to change. We reply with questions and a time to walk the building with you.