Example project: a fictional hotel's first 120 days
Example (fictional). The Pearlbank Hotel does not exist and is not a client. Every number on this page is a planning assumption, and nothing here describes a result that happened.
For: Hotel owners, general managers and property managers considering water reuse

Example (fictional). The Pearlbank Hotel is an invented building used to show how a Maredes project runs. It is not a client, and no system described here has been built. Every figure is a planning assumption taken from public sources and the default values of our calculators. Real buildings differ, and real results are measured, not assumed.
This page follows one fictional hotel through the six stages on how we work, from the first visit to the first maintenance log entry. It shows what each step produces on paper, what the numbers look like, and one option that was screened and set aside.
The building
The Pearlbank Hotel is a 96-room select-service hotel in a humid Southern city. It has an on-premise laundry, a small breakfast kitchen and landscaped grounds. Guest rooms are cooled by in-room units, and central air handlers serve about 50,000 square feet of lobby, corridors and meeting rooms. The roof is 18,000 square feet.
At 70 percent average occupancy the hotel sells about 2,043 occupied room-nights a month. Its bills show about 300,000 gallons a month (about 401 CCF), or 10,000 gallons on an average day, which works out to about 147 gallons per occupied room-night. Using the end-use shares in EPA WaterSense’s Saving Water in Hotels, that average day splits as shown in the water balance below. About 7,400 gallons a day reach the sewer; irrigation and cooling losses do not.
The first 120 days
| Day | Step | Stage | Document produced |
|---|---|---|---|
| 1 | Water review visit: bills, meter, laundry, kitchen, air handlers, roof | 1. Water review | Visit notes, photos, equipment list, a first water balance from the bills |
| 3 | Samples from the kitchen tap, the laundry supply and one condensate drain sent to a certified laboratory | 2. Sampling and lab tests | Sampling plan and the laboratory’s chain-of-custody form |
| 14 | Laboratory results arrive | 2. Sampling and lab tests | The laboratory’s report |
| 21 | Written review delivered; it notes two running toilets, which hotel staff fix before any design | 2. Sampling and lab tests | Written water review: water balance, results explained, findings in order of cost, reuse screen, open questions |
| 22 to 60 | System design | 3. System design | Drawings, equipment specification, monthly water balance, code path memo, contractor bid package |
| 61 to 75 | Bids from licensed plumbing and mechanical contractors | 4. Installation | Bid comparison against the package |
| 76 to 110 | Installation, with permits pulled before work | 4. Installation | Permit and inspection records, submittal reviews, marked-up drawings |
| 111 to 120 | Start-up, verification sampling, first maintenance log entries | 5. Start-up and verification, then 6 | Start-up and verification report, operating manual, maintenance log, service plan |
The order matters more than the dates. Leaks and fixtures come first because they cost the least to fix. Design waits for laboratory results, and installation waits for a written specification that every bidder prices the same way.
What the design includes
Laundry rinse recycling
The laundry uses about 1,600 gallons on an average day, about 23.5 gallons per occupied room-night. The design is simple rinse recycling: the final rinse of each load is held in a small tank and reused as the first rinse of the next load. EPA WaterSense at Work says simple recycling “rarely needs treatment” and saves 10 to 35 percent of laundry water, and advises contacting the chemical supply vendor in any retrofit planning. The plan assumes 25 percent, or 400 gallons a day, with a strainer and a holding tank beside the washer extractors.
A rain and condensate tank for drip irrigation
The roof collects about 1,403 gallons a day on average: 18,000 square feet times 57.35 inches of rain a year (the NOAA 1991 to 2020 normal at Jackson International Airport) times 0.62 gallons per square foot per inch times 80 percent capture, the method in EPA WaterSense at Work. The air handlers add 150 to 500 gallons on a cooling day, from EPA’s range of three to 10 gallons per 1,000 square feet.
On paper, rain plus condensate (about 1,560 gallons a day averaged over the year) nearly matches the 1,600 gallons the landscaping uses. In practice rain arrives in storms. One inch on this roof yields about 8,928 gallons, close to a full tank, so heavy storms overflow and dry spells drain it. The design uses a tank of about 10,000 gallons and plans on about 900 gallons a day as the usable average, a figure to check against the meter in the first year. Because the drip lines run near guest paths, the water is filtered and passes a UV unit before use, as EPA advises wherever people can touch or breathe reused water. City make-up water enters through an air gap or a backflow preventer, and the irrigation piping is purple and labeled.
Greywater: screened and not chosen
The reuse screen also looked at shower and bathroom sink water for toilet flushing. On paper it is plentiful: the greywater calculator, set for this hotel, shows about 2,291 gallons a day collected against 858 gallons of flushing demand. It was not chosen, because the existing building has no separate drain and supply piping, and adding it would mean opening walls and ceilings across the guest floors. The DOE notes that dual plumbing is easier in new construction, so the review records greywater as an option for a future renovation.
The code path memo
The memo is written for the local building official. It names the office that approves the reuse systems, the plumbing code edition the city has adopted, the backflow protection on each make-up connection, the purple piping and signage, the monitoring schedule, and what happens if any part is not approved. Mississippi, for comparison, has no state greywater or onsite reuse rule, so a project there would be approved project by project.
Water balance: today and with reuse
Gallons on an average day.
| End use | Today | City water with reuse | Reuse water supplied |
|---|---|---|---|
| Guest rooms and restrooms | 3,000 | 3,000 | 0 |
| Laundry | 1,600 | 1,200 | 400 (rinse recycling) |
| Landscaping | 1,600 | 700 | 900 (rain and condensate) |
| Kitchen | 1,400 | 1,400 | 0 |
| Cooling and heating | 1,200 | 1,200 | 0 |
| Other (with pools) | 1,200 | 1,200 | 0 |
| Total city water | 10,000 | 8,700 | 1,300 |
| To the sewer | 7,400 | 7,000 |
The planned result is 1,300 gallons a day of city water replaced, 13 percent of supply.
What it could mean on the bill
Over a year, 1,300 gallons a day is 474,500 gallons, or 634 CCF. The hotel’s bills run about 401 CCF a month, so the water it stops buying comes off the top block. At an example combined water and sewer rate of $26.67 per 1,000 gallons (JXN Water’s block above 350 CCF from March 23, 2026), that is about $12,655 a year in charges avoided. Subtract an example operating cost of $2,400 a year for filters, power, sampling and service, and the net is about $10,255. On an example installed cost of $60,000 from contractor bids, the simple payback is 5.9 years. Part of the saving would fall in the next block down once use drops below 350 CCF, so the real figure would be slightly lower. These are example figures, not Maredes prices and not a promise. Simple payback ignores financing and price changes, and rates change, so a real project uses its own current bill.
Reproduce the numbers
Each calculator opens with this hotel’s values as its default example.
- Where hotel water goes: 2,043 occupied room-nights a month, 147 gallons per occupied room-night, 48,000 gallons a month of laundry.
- Rainwater calculator: 1,403 gallons a day on average from the roof, 88 percent of the 1,600-gallon landscape demand.
- Condensate calculator: 150 to 500 gallons on a cooling day from 50,000 square feet.
- Tank sizing calculator: 10,080 gallons for six days of demand with a 5 percent margin.
- Water savings calculator: $12,655 avoided, $10,255 net, 5.9 years.
Change any input to see how your own building compares. For a real one, the first step is the same as here: a water review. See hotels for what Maredes looks at in a lodging property.
Start with a water review.
Tell us about the building: what it is, who uses it, where the water comes from and what you would like to change. We reply with questions and a time to walk the building with you.