Water treatment and reuse services for one building
Water treatment and reuse, designed for one building. It starts with a lab test of your water.
For: Owners and managers of hotels, apartments, homes, restaurants and small commercial buildings

Maredes designs and specifies compact water treatment and reuse systems for one building at a time: a home, an apartment community, a hotel, a restaurant or a small commercial building. The eight services below fit together in a fixed order. You can stop after the first one or continue through the rest, but every project begins the same way, with a lab test of your water and a look at where it goes.
How the services connect
First, find out what is in the water and where it goes
The water review reads twelve months of bills, walks the building from the meter to the roof and sends samples to a laboratory certified for drinking water. It ends with a written review, a water balance and findings in order of cost. Leaks and running toilets come before any equipment. Many owners stop here.
Then, design what the results justify
System design turns the review into drawings, an equipment specification that names the certification each component must carry, and a bid package for licensed contractors. For any reuse system it adds a monthly water balance and a written code path memo for the local building official.
The systems
Two services treat the water people drink and use. Whole-building filtration works at the point of entry: sediment, carbon, softening, iron and manganese. Drinking water systems work at the point of use: kitchen taps, break rooms, ice machines, coffee and beverage lines.
Three services give water a second, non-potable use. Laundry water recycling reuses rinse water inside an on-premise laundry. Rainwater and condensate capture collects roof rain and air-conditioning condensate for irrigation, cooling tower make-up or toilet flushing. Greywater recycling treats shower, bath and bathroom sink water for toilet flushing or subsurface irrigation. EPA lists irrigation, cooling tower make-up and toilet flushing among the uses of onsite alternative water, and recommends disinfection for any of it used indoors. Reuse water is never used for drinking.
After start-up, keep it working
Monitoring and service begins with verification sampling compared with the original lab results, then continues with filter, membrane and UV lamp changes, readings, a maintenance log and plain-language reports.
Who does what
Maredes designs, specifies and checks the work. Certified laboratories analyze the samples. Licensed plumbing and mechanical contractors install the equipment, with permits pulled before work begins; the Department of Energy’s guidance also calls for installation by licensed plumbing contractors. Where the local authority requires an engineer’s seal on drawings, a licensed engineer provides it.
See engagements for how these services are packaged, how we work for each stage, and the example project for a fictional hotel taken through all of them.
- Water review
Bills, a building walk and certified lab tests, explained in plain language.
- Whole-building filtration
Point-of-entry treatment for a home or small building, chosen from lab results.
- Drinking water systems
Point-of-use treatment for kitchens, break rooms, ice machines and beverage lines.
- Greywater recycling
Shower and sink water treated for toilet flushing or subsurface irrigation.
- Laundry water recycling
Rinse water reused within the wash cycle of an on-premise laundry.
- Rainwater and condensate capture
Roof rain and air-handler condensate for irrigation, cooling make-up and flushing.
- System design
Drawings, specification, code path memo and a bid package for licensed contractors.
- Monitoring and service
Verification sampling, scheduled changes, readings, a maintenance log and reports.
Start with a water review.
Tell us about the building: what it is, who uses it, where the water comes from and what you would like to change. We reply with questions and a time to walk the building with you.