Filter cartridge life calculator
A cartridge has two limits: the gallons it was tested to and the months the maker allows. Replace it at whichever comes first.
For: Homeowners, office and break room managers, and restaurants with ice and beverage filters

Calculator
A drinking water filter does not announce that it is finished. Water keeps flowing and usually tastes the same, while the cartridge removes less. This calculator works out when to replace it, from two limits printed in the product’s documents. It is for homeowners with an under-sink filter, office and break room managers, and restaurants with filters on ice machines and beverage lines.
EPA’s fact sheet on home filters puts it simply: “Filters are only effective if they are maintained.” EPA’s lead guidance says the same in practice: if you use a filter certified to remove lead, replace the cartridges on schedule.
The method
- Usable capacity = rated capacity in gallons x (1 minus your reduction for silt, iron or heavy use).
- Days until the gallon rating is reached = usable capacity divided by the gallons drawn through the filter each day.
- Days until the time limit is reached = the maker’s maximum months x 30.4.
- Replace every = the smaller of the two, with a note of which limit decided it.
- Replacements per year = 365 divided by that interval.
The inputs and where to find them
- Rated capacity. The gallons the cartridge was tested to for its certified claims. It appears on the product’s performance data sheet and, for many products, in the certifier’s listing, such as NSF’s drinking water treatment unit listings. Certification is claim-specific, so check the capacity stated for the contaminant you care about.
- Water drawn per day. Drinking and cooking water only, if the filter serves one tap. A planning figure for four people is 2 to 4 gallons a day. An ice machine or a coffee brewer draws more; its manual gives a daily water use or ice production figure to start from. A small flow meter on the filter line removes the guesswork.
- Maximum time in service. From the maker’s instructions, usually in months, even if few gallons pass through.
- Reduction for silt, iron or heavy use. Start at 0 for clear city water. Raise it if the cartridge clogs early or the water carries sediment or iron, which shorten cartridge life.
The default example
Example (fictional). A kitchen drinking water filter rated for 750 gallons and 6 months, serving 3 gallons a day with no reduction. The calculator returns: usable capacity after your reduction 750 gal; days until the gallon rating is reached 250; days until the time limit is reached 182; replace every 182 days (about 6.0 months); limited by time in service; replacements per year 2.0.
Now put the same cartridge on a line that draws 10 gallons a day, as an ice machine might. The gallon rating is reached in 75 days, about 2.5 months, and the gallon limit, not the calendar, decides. That is close to five cartridges a year instead of two.
Reading the result
“Limited by” tells you which number to watch. If time decides, a calendar reminder is enough. If gallons decide, a change in use (more staff, a busier season, a new ice machine) changes the interval, so recalculate when use changes.
Replace sooner than the calculator says if flow drops, the pressure gauges on either side of a housing show a growing difference, the water’s taste or color changes, or the filter took in water during a boil-water notice (see the boil-water notice checklist). For food service, MSDH’s guidelines for food facilities ask operators to maintain ice machine and dispenser filters according to the manufacturer.
Limits and next steps
The calculator covers cartridge filters. Reverse osmosis membranes, UV lamps and softener resin follow their own schedules from the maker. It also assumes the cartridge is certified for the problem you have, which the treatment selector helps you check.
Record every change in the filter maintenance log, with the date, the cartridge model and the next due date. For buildings with several filters, ice machines and beverage lines, Maredes specifies drinking water systems with change intervals written into the design, and a service plan can keep the schedule after start-up.
Start with a water review.
Tell us about the building: what it is, who uses it, where the water comes from and what you would like to change. We reply with questions and a time to walk the building with you.