Maredes homeRequest a water review
Menu

Rainwater calculator for Mississippi roofs

Roof area, rainfall and a capture efficiency give the gallons a roof can deliver to a tank in an average year, month and day.

For: Owners of hotels, apartments, offices and homes with a large roof and builders

A plain clear cylindrical rain gauge stands half submerged while raindrops strike the water surface around it, each drop making small rings above the line.

Calculator

Example values are filled in (the fictional Pearlbank Hotel roof). Replace them with your own; results update as you type. Nothing you enter leaves your browser.

The NOAA 1991 to 2020 normal at Jackson International Airport is 57.35 inches. Use your own location's normal.
EPA notes most installers assume 80 percent after first flush, splash, overflow and evaporation.
In the example, the hotel's landscape irrigation on an average day.

Results

Gallons captured per inch of rain
8,928 gal
Gallons captured in an average year
512,021 gal
Average per month
42,668 gal
Average per day
1,403 gal
Share of your non-potable demand covered on average
88%
A 1-inch storm fills a tank of
8,928 gal

Roof area times rainfall times 0.62 gallons per square foot per inch times capture efficiency, the method in EPA WaterSense at Work. Rain arrives in storms, not evenly, so storage decides how much of this you can actually use; size it with the tank sizing calculator.

This calculator estimates how much rain a roof can deliver to a tank in an average year, month and day, and how much of a non-potable demand it could cover: landscape irrigation, cooling tower make-up or toilet flushing. It is for owners of hotels, apartment buildings, offices and homes with a large roof and a steady outdoor or cooling demand, and for builders planning a tank.

The method

EPA WaterSense at Work gives the rule: 0.62 gallons can be collected per square foot of roof per inch of rain, and most installers assume a capture efficiency of 80 percent. The calculator follows EPA’s equation:

  • Gallons per inch of rain = roof area x 0.62 x capture efficiency. This is also what a 1-inch storm sends to the tank.
  • Gallons in an average year = gallons per inch x yearly rainfall.
  • Average per month and per day = the yearly figure divided by 12 and by 365.
  • Share of demand covered = the daily average divided by your daily demand, capped at 100 percent.

Why 0.62: one inch of rain on one square foot is a twelfth of a cubic foot, about 0.623 gallons. Texas A&M AgriLife Extension uses 0.623. The Texas Water Development Board uses 0.62 and its worked example assumes 85 percent efficiency.

The inputs and where to find them

  • Roof area. Measured flat (the footprint, not along the slope), counting only the parts that drain to the downspouts you would collect from. Take it from the roof plan or the site plan.
  • Average yearly rainfall. The default is 57.35 inches, the NOAA NCEI 1991 to 2020 normal at Jackson International Airport. Elsewhere in Mississippi, use the nearest station’s normal.
  • Capture efficiency. 80 percent, after first flush, splash, overflow and evaporation (EPA). Lower it if gutters overflow in heavy storms.
  • Demand. The daily non-potable use the rain would serve: an irrigation meter, the summer rise in your bills, or a cooling tower make-up meter.

The default example

Example (fictional). The Pearlbank Hotel, a fictional 96-room hotel, has an 18,000-square-foot roof. With 57.35 inches of rain, 80 percent capture and a demand of 1,600 gallons a day (its landscape irrigation on an average day), the calculator returns: gallons captured per inch of rain 8,928 gal; gallons captured in an average year 512,021 gal; average per month 42,668 gal; average per day 1,403 gal; share of your non-potable demand covered on average 88%; a 1-inch storm fills a tank of 8,928 gal.

Rain by month in Jackson

Jackson’s rain is spread fairly evenly through the year. The table multiplies the fictional example roof’s 8,928 gallons per inch by NOAA’s monthly normals (our arithmetic, rounded).

Month Normal rain (in) Example roof (gal)
January 5.42 48,390
February 5.10 45,533
March 5.68 50,711
April 5.84 52,140
May 4.36 38,926
June 4.43 39,551
July 5.02 44,819
August 4.69 41,872
September 3.48 31,069
October 3.80 33,926
November 4.40 39,283
December 5.13 45,801

Reading the result

The average per day is a ceiling, not a forecast. Irrigation demand peaks in the hot months, while September and October are the driest. Rain also arrives in storms: the Jackson station averages 75.4 days a year with at least a tenth of an inch. So the tank, not the roof, decides how much rain is used. A 1-inch storm sends 8,928 gallons from the example roof; anything beyond the tank’s free space overflows.

Example (fictional). In the example project, the Pearlbank Hotel plans one tank of about 10,000 gallons (a little more than one inch of rain from its roof) to store rain and condensate together. A month-by-month balance puts the usable average for both at about 900 gallons a day, not the 1,403 of rain shown above, so the 88 percent share overstates what the tank can deliver.

Limits and next steps

DOE notes that rainwater harvesting is not regulated by the federal government; states regulate it, and the local building official decides piping, labeling and backflow protection. Maredes writes a code path memo for each reuse project. Treatment follows the end use: in the example, drip lines near guest paths get filtration and UV, and EPA recommends disinfection for any water used indoors.

Size storage with the tank sizing calculator, add air-conditioning water with the condensate calculator, and price the result with the water savings calculator. Climate context for the region is on Jackson, Mississippi.

Start with a water review.

Tell us about the building: what it is, who uses it, where the water comes from and what you would like to change. We reply with questions and a time to walk the building with you.