Maredes homeRequest a water review
Menu

Water use calculator for a home or small building

Count the people, the fixtures and the minutes, and see how many gallons a day the building uses, where they go and what they cost.

For: Homeowners, landlords and managers of small offices, clinics and shops

An hourglass filled with water instead of sand lies tilted at the waterline, its upper bulb above the surface holding a little water and its lower bulb submerged.

Calculator

Example values are filled in (a fictional household of four in an older house). Replace them with your own; results update as you type. Nothing you enter leaves your browser.

The federal standard is 1.6 gallons per flush; WaterSense labeled toilets use 1.28 or less (EPA). Older toilets use more.
Standard showerheads use 2.5 gallons per minute; WaterSense labeled showerheads use no more than 2.0 (EPA).
The standard flow is 2.2 gallons per minute; WaterSense labeled bathroom faucets use no more than 1.5 (EPA).
ENERGY STAR puts a standard full-size washer at 20 gallons a load and a certified one at 14.
EPA says household leaks can waste 180 gallons a week per family, about 26 a day. Read the meter before and after two hours with no water in use.
JXN Water charged $7.48 per CCF (748 gallons) for combined water and sewer in the first 50 CCF a month from March 23, 2026, about $10 per 1,000 gallons. Use your own bill.

Results

Toilets per day
32 gal (17%)
Showers per day
80 gal (43%)
Faucets per day
53 gal (28%)
Clothes washer per day
20 gal (11%)
Dishwasher per day
2 gal (1%)
Outdoor watering per day
0 gal (0%)
Leaks per day
0 gal (0%)
Total per day
187 gal
Per person per day
47 gal
Per month (30 days)
5,613 gal
Per year
68,286 gal
Yearly cost at your combined water and sewer rate
$683
Showers, faucets and laundry (possible greywater) per day
153 gal

An estimate from fixture flow rates and habits, not a meter reading. Compare the total with your water bill: a large gap often means a leak, an irrigation timer or a fixture that uses more than its label.

This calculator estimates how much water a home or small building uses on an average day, where it goes, and what it costs a year at your combined water and sewer rate. It is for homeowners, landlords and managers of small offices, clinics and shops who want to check a bill against the fixtures in the building. For a hotel, start from the bills instead with Where hotel water goes.

How the estimate is built

Each fixture is counted the same way: people, times how often each person uses it, times the gallons per use.

  • Toilets: people x flushes per person per day x gallons per flush.
  • Showers and faucets: people x minutes per person x flow in gallons per minute.
  • Clothes washer and dishwasher: loads per week x gallons per load, divided by 7.
  • Outdoor watering: gallons per week, divided by 7.
  • Leaks: gallons per day, as entered.

The daily total is the sum. It is multiplied by 30 for a month and 365 for a year, and the yearly gallons are priced at your rate per 1,000 gallons. The last row adds showers, faucets and the clothes washer: water that could, in principle, be collected as greywater.

The inputs and where to find them

Input Where to find the number
People Usual occupants, or staff and visitors on a typical day
Flushes per person 5 is a planning assumption; part-day occupants flush less
Gallons per flush Stamped inside the tank or behind the seat hinge. The federal standard is 1.6; WaterSense labeled toilets use 1.28 or less (EPA)
Shower minutes and flow Time a few showers. Standard showerheads use 2.5 gallons per minute, WaterSense labeled models no more than 2.0 (EPA). Or time how long the shower takes to fill a one-gallon bucket
Faucet minutes and flow The flow is often printed on the aerator. The standard is 2.2 gallons per minute; WaterSense labeled bathroom faucets use no more than 1.5 (EPA)
Washer gallons per load The manual or the label. ENERGY STAR puts a standard full-size washer at 20 gallons a load and a certified one at 14
Dishwasher gallons per load The manual or the label; 4 is an assumption
Outdoor watering Controller run time x zone flow, or the summer rise in your bills
Leaks Read the meter, use no water for two hours, read it again. EPA says household leaks can waste 180 gallons a week per family
Rate Your bill: add the water and sewer charges per unit and convert to 1,000 gallons. One CCF is 748 gallons

The default rate, $10 per 1,000 gallons, comes from JXN Water’s combined water and sewer charge of $7.48 per CCF for the first 50 CCF a month, in effect from March 23, 2026.

The default example

Example (fictional). A household of four in an older house: 5 flushes each a day at 1.6 gallons, 8-minute showers at 2.5 gallons per minute, 6 faucet minutes each at 2.2 gallons per minute, 7 washer loads a week at 20 gallons, 4 dishwasher loads at 4 gallons, no outdoor watering and no leaks, at $10 per 1,000 gallons. The calculator returns toilets 32 gal (17%), showers 80 gal (43%), faucets 53 gal (28%), clothes washer 20 gal (11%) and dishwasher 2 gal (1%) a day. The total is 187 gal per day, 47 gal per person, 5,613 gal per month (30 days) and 68,286 gal per year, about $683 a year. Showers, faucets and laundry (possible greywater) come to 153 gal per day.

Change three inputs to WaterSense values (1.28 gallons per flush, 2.0 gallons per minute for showers, 1.5 for faucets) and the same household drops to about 148 gallons a day. The showers alone fall from 80 to 64 gallons.

Reading the result

Compare the total with your bill: CCF x 748 gives gallons; allow for the days in the billing period. If the bill is much higher, look for a leak, an irrigation timer or a fixture that uses more than its label says. If the estimate is higher, your minutes are probably generous.

The percentages show where to act first. In the example, showers are the largest use, so a showerhead change saves more than a new toilet. Leaks and fixtures come before any treatment or reuse equipment: they cost less to fix than anything Maredes could design.

The greywater row is an upper bound. EPA defines greywater as water from bathroom sinks, bathing and laundry, and excludes kitchen sinks, so if your faucet minutes include the kitchen, part of that row is not greywater.

Limits and next steps

This is an estimate from habits and labels, not a meter reading. It leaves out water that runs to the drain unnoticed, such as softener regeneration and reverse osmosis reject water (EPA says a typical point-of-use unit sends five gallons or more to the drain for every gallon it makes).

The greywater calculator compares the greywater row with toilet flushing, and the water savings calculator prices a reduction. To have the building measured rather than estimated, gather what the water review checklist lists for a water review. Homeowners can also read about homes on city water or a private well.

Start with a water review.

Tell us about the building: what it is, who uses it, where the water comes from and what you would like to change. We reply with questions and a time to walk the building with you.